How to Iron Satin: Step-by-Step Guide


Start by turning the satin garment inside out so that dull backside it facing skywards and the shiny frontside is facing down. Lay the satin evenly on an ironing board and use a spray bottle to add moisture to the wrinkled area. Cover the area you wish to iron with a cotton pressing cloth and turn the iron on to the lowest heat setting. Hand press the iron on to the wrinkled areas and continue until the satin is completely wrinkle free. 


This is How to Iron Satin: Step-by-Step Guide

how to iron satin banner image with a picture of a man ironing a satin shirt on an ironing board

Our article How to Iron Satin: Step-by-Step Guide gives you the complete set of instructions you need in order to iron your satin perfectly. 


Contents:

In order to make sure you are providing the absolute best care for your satin clothing or bedding, be sure to read our complete set of instructional care guides. 

discount code for mens silk shirts
discount code for mens silk shirts

How to Iron Satin

Satin fabric is most commonly made from either silk or polyester fibers. The instructions below apply to both silk satin as well as polyester satin.


Things You'll Need:


  • An iron
  • A thin cotton press cloth
  • An ironing board 
  • A spray bottle filled with water
  • a clean satin garment


Carefully follow the steps below to learn how to iron satin properly. 


1. Check the Care Label 


Before ironing your satin garment it is critical that you first check the item's care label. If your satin garment instructs you to dry clean only, then take it to the dry cleaners and do not try to iron at home. 

photo of a satin garment's care label

2. Turn the Garment Inside Out 


Turn the garment inside out and lay it evenly on theironing boardso that the dull backside of the fabric is facing skywards. Always iron satin from the dull backside, and never the glossy frontside. 

photo of a man turning a green satin shirt inside out

3. Add Moisture


Fill a spray bottle with clean water, adjust to the mist setting, and spray water evenly throughout the area you wish to iron


Tip: If the satin has deep wrinkles or creases, you may choose to add a little extra moisture. In the end, the satin material should be slightly damp but not soaking wet.

photo of a man holding a spray bottle filled with water and adding moisture to a satin shirt

4. Pressing Cloth


Place a thin cotton press cloth over the wrinkled area that you wish to iron. You can use a pillowcase, bandana, handkerchief, or thin towel as a pressing cloth. 


Tip: Never place a hot iron directly on to satin. Always keep a pressing cloth in between the iron and the satin.

photo of a red bandana press cloth laid overtop of a satin shirt

5. Lowest Heat Setting


Adjust the heat setting on the iron to the lowest heat level possible and make sure the steam function is activated.


Tip: The low heat setting on your iron may be referred to as delicate or gentle.   

photo of an iron dialed to the lowest heat setting

6. Hand Press the Iron


Hand press the iron on to the wrinkled areas of the garment, with the pressing cloth always in between. Press the wrinkles and adjust the garment on the ironing board until the satin is completely wrinkle free. 


Tip: Do not slide the iron back and forth on the satin. Simply pick a spot, briefly and gently press the iron down, lift, and repeat. 

photo of a man hand pressing an iron and removing wrinkles from a green satin shirt

7. Air Dry


Hang or lay flat to air dry in a cool place out of contact with direct sunlight. 


Tip: Never put your satin in the dryer unless the care label explicitly allows for it. 

photo of a green silk shirt being hung to air dry

Use our step-by-step guides to learn how to iron other types of silk and satin items. 


How to Iron Satin FAQ

Is satin easy to iron?

Satin can be ironed quickly and easily at home with just a few steps. Turn your satin inside out and lay it flat on the ironing board. Use a spray bottle to add some moisture and cover the wrinkled area with a pressing cloth. Turn the iron on to the lowest heat setting, and hand press your satin until it is wrinkle free. 

What setting do you iron satin?

Adjust the iron to the lowest heat setting possible when ironing satin. If your iron has a silk, satin, delicate, or gentle setting, use that. Otherwise, simply adjust the settings to the lowest level of heat possible. 

Can I iron a satin cloth?

Satin cloth can be ironed, as long as you are following the proper care guidelines. To iron satin cloth: turn the iron on to the lowest heat setting, use a pressing cloth, add moisture to the satin cloth, and iron from the dull backside. 

Can you iron polyester fabric?

Polyester fabric can be ironed, however, polyester has a low tolerance for high levels of heat. This means it is very important that you adjust the iron to the lowest heat setting possible before you begin ironing anything made from polyester.